Faärken, Inc. Biker Stirrups

Faärken, Inc. Biker Stirrups work best when wearing boots or shoes with heels.

If you wear your pants according to your inseam, you will find that my Faärken, Inc. Biker Stirrups not only look great while riding, but you’ll want to wear them when you’re just hangin’ out.

Instructions for proper use

  • DO NOT PLACE THE CLIPS ON THE SEAM!!!

  • DO NOT FORCE THE CLIP CLOSED IF THERE IS TOO MUCH RESISTANCE!!!

  • If there is too much resistance, move the clip to an area of the cuff where the clip closes easily and with a snap.

  • Forcing the clip closed while on the seam or placing too much fabric too deep inside the clip jaw will cause the tension tab of the main clip to curl or bend and it will no longer stay closed.

  • PLACE THE CLIP IN FRONT OR BEHIND THE SEAM.

  • Please make sure your stirrups are securely fastened to the bottom edge of your pants before riding.

  • While standing, adjust the length of the strap so the pants are tight against the top of the boot. Move the triglide adjuster towards the end of the strap so that the unused portion of the elastic strap is not left loose. Please be sure that your stirrups are securely fastened to your pants before fiding. Faarken, Inc. assumes no responsibility for any damages in the unlikely event that they should come loose while riding.



If the tension tab is bent, please follow these instructions.

Tension tab should be at right angle to the main clip. If bent or curled, use pliers to straighten.

If you need to replace the main clip, use needle nose pliers to carefully bend out one hinge. HOLD ON TO THE CLIP SO THAT IT DOES NOT COME APART. Replace with a new clip and bend hinge back into place.